#How To Find Property Pins And Markers In Maine Tag | The Ring Finders

Three Property Pins, Markers, Lost In York, Maine, Found In The Snow, With A Metal Detector

  • from Old Orchard Beach (Maine, United States)

I was contacted by Deanna, concerning finding some long lost property pins/markers, on her York, Maine property. Her neighbors had recently sold their home and Deanna would just like to find the pins, dividing the properties. Deanna has lived at her current home for 15 years and has the most recent survey prints, from just before she bought her home, 15 years earlier. Deanna told me that she herself had pulled one of the pins, out of the ground, because it was in the way of her mowing. She now regrets that decision. There are two pins, in particular, Deanna would like us to find. The first, must find pin, is along the road and approximately 380’, from a property pin, in the front of her house, next to a fence. Pin #1 isn’t vital to find, but would make this job much easier. The pin is no longer visible, so we will need to find this pin #1, in a very confined corner, then measure 380’, down the road and search for pin #2, that Deanna wants us to find. If and when we find Pin #2, we will need to measure approximately 102 feet, out into the field, and find the Pin #3, that needs to be found, for Deanna. Deanna would also like to find a 4th pin, but it wasn’t as important as pins #2 & 3. For a job this big, area wise and measurement wise, I called in Gary Hill, to assist. Gary was happy to go with me and I set a date and time with Deanna.

This morning, December 11th, 2025, Gary and I headed to York, Maine. We arrived at just before 8:00am and was promptly met by Deanna. She showed us the area and then had to head into work. Gary and I immediately got to work and went to find Pin #1, in the front of the house, along the fence. This pin was found within 1 minute and we now had a property pin, to measure from and down the road, 380’, to Property Pin #2. This is one of the must find pins, that Deanna wanted us to find. So, Gary and I retrieved the 300’ tape measure and looped it around Property Pin #1. I then walked it down the road 300’ and marked it, at that point. Gary brought the tape up to the 300’ mark and we measured out another 80’. We should now be able to locate Pin #2, in the vicinity. Using a tape measure isn’t as accurate as GPS, now used by surveyors but it will put us very close, to within a foot or so. Gary and I started searching and our first target looked promising. A definite piece of iron, ringing up in the ferrous range. As we dug it, it turned out to be a large spike, from a long, long time ago. As we continued the search, our second target was also a ferrous target and after digging it, we had found what we were looking for. Property pin #2, had been found. Deanna had given us some orange stakes, to place next to the property pins. This pin was a pipe, as was Pin #1 and we placed the orange stake, right into the pipe. This Pin #2 was within a foot of where the 380’ measurement came to. I love it when it works out like this. Now on to Property Pin #3. A must find, for Deanna. Gary and I then measured approximately 102’, into the field and Gary noticed an iron rebar rod, sticking out of the ground, at just about the area, we would be searching in. We dug around the rebar and saw that the rebar had actually been placed, inside a pipe, like the one we had just found, up near the road. This was to easy, so we searched the area, for anymore property pins, but found absolutely nothing. Fantastic!!! Property Pins #1,2 and 3 had been found. Now let’s see if Pin #4, is findable. Deanna had told me that she thought Pin #4 may be in amongst some trees. Only one way to find out, Gary and I measured the 85’ and because it is being measured, at an angle and not a straight line, from Pin #3, we had a slightly larger area, to search. Some of the area, as you got close to the trees, were difficult to search, because the hay was fairly tall and we couldn’t swing the metal detector, very well. This area also has what looks like some sort of small path, for farm equipment or ATV’s. The path area was frozen and difficult to dig. The area also was producing a lot and I mean, a lot of large ferrous targets. We were digging up large iron pieces of old farm equipment. Could these pieces of iron, be masking out, the much smaller iron Property Pin? We did find a large iron Pin but we are not sure if it is the Property Pin. It was found 4’, short of where it should have been found. Gary and I think it may have been part of a fence, at one time. We had been finding fence wire in the area, so kind of makes sense. We decided to call it a day, due to the difficult circumstances and return, in the spring, once the ground thaws, on the path and the hay will be flattened, from this winters snow. I am sure we will find Pin #4, in the spring. I sent Deanna a message about finding 3 of the four Property Pins and two of the pins, were the ones, she really wanted, to have us find. Gary and I were happy to have found the three and were really happy to be getting out of the brutal windy conditions. We now have something to look forward to, this sprig and Deanna is extremely happy to finally know where the Property Pins are.
As a side note, I am not a licensed surveyor. I am just a metal detectorist trying to help others out. I informed Deanna and all my clients that I may find their property pin but I cannot guarantee that the pin is in the correct location. I have no way of knowing if the pin has actually been moved, in the past, or not. Only a licensed surveyor can guarantee the pins are in the correct spot.
Another adventure with property pins and this was a first for Gary and I. We searched fo, the pins, in the snow. We had never done that before and we were actually surprised at how much fun it was. Ok, not that much fun! Thankfully, not all of the ground was frozen and the snow was only an inch or two deep. This up coming spring, Gary and I will head back to York and hopefully find Property Pin #4. Who doesn’t love helping others out. Gary and I are happy, Deanna is happy. A win, win for everyone and smiles all around. We have the best job in the world😀❤️🙏

Newlywed’s Gold Wedding Ring Lost In The Portland Maine Hay, Found Visually, While Searching With A Metal Detector

  • from Old Orchard Beach (Maine, United States)

Sunday morning, November 23rd, I received a phone call, from Chase. Chase told me that 2 days previously, on Friday, he noticed his wedding ring was missing. I asked him where he lost it and Chase said it could possibly be in two different places. The most likely area was at a new home construction, in Portland, Maine or inside a buying being totally rehabbed, also in Portland. The new home construction was where Chase thought his wedding ring was lost. He had been throwing down hay, on the new lawn and at one point, he actually felt his wedding ring slipping off and he caught it, before the ring actually left his finger. When he finished with the lawn, he drove over to the building being rehabbed and worked there for the next two hours, before he noticed his wedding ring was no longer on his finger. Chase searched the building he was currently working in but could not find the ring. He had been tearing down the walls, to the studs and throwing the debris, into a dumpster. Chase was really hoping the ring wasn’t in the dumpster, full of demo. He remembered the ring almost coming off, at the new construction and headed back there, visually searching the hay, he had thrown down. Unfortunately this search and a subsequent search, the next day resulted in disappointment. The wedding ring was not found. I told Chase I could absolutely search the hay, at the new construction site but the indoor rehab site would have to be a visual search only. There is just to much metal, inside buildings and our metal detectors, do not work well, at all. As I was the only one home watching our 8 year old Granddaughter, I told Chase I would be right out there, once my daughter got off work or my wife Cheryl returned home, from her 5 mile walk. About an hour later, Cheryl returned home and I headed to Portland.

When I arrived at the new construction, in Portland, Chase was already there, waiting inside his truck, for me. After a greeting, Chase told me the ring was new, as he had just gotten married, in October. I told him that I have had many newlywed recoveries, as the rings just don’t always fit right and the newlyweds just aren’t use to having a ring on. I was praying to myself to find this wedding ring, for Chase and his bride. We then got right down to business. Chase reexplained everything and walked me around the new construction and showed me where he had been putting the hay down, which ended up around the entire house. The area wasn’t large at all and I thought to myself that I should be able to cover the entire area, in just 30 minutes or so. I started the search, on the left front corner of the building , as you faced it and would work my way clockwise, around the building. As I started searching, I was finding quite of few pieces of construction metal, go figure. Small pieces of aluminum, copper, brass, etc.. Chase continued his visual search, for his ring, just a few feet ahead of me, occasionally coming back to see what had set my detector off. Unfortunately, I had finished the left side of the house and the backyard, with no ring being found. As I was heading down the right side of the house, I had completed approximately 2/3 of the searchable area and was starting to get nervous, as I was running out of real estate to search. As I was making my way down the right side of the house, with Chase just 10 feet or so ahead of me, I heard Chase say something to me and I looked in his direction. He was hold something up and showing me, as I asked, “Is that the ring, did you find it?’ As Chase nodded his head up and down, he said “Yes, I found it”. I walked right over to him and gave him a high 5 and congratulated him. He looked at me and said “Do you know how many times I have walked and looked at the hay, in this area, the last few days. It just blends in with the hay.” Chase and I both had big smiles and I could see the relief, on his face. He was one happy newlywed as I am sure his wife, Annie was, as he sent her a photo of the ring. I always say that once I am on scene it becomes a team effort. Clients will continue to search visually and if the area is large enough, I will bring an extra metal detector, with me, that my client may use. It doesn’t matter who finds the ring. The goal is to put the ring back on the finger. Mission accomplished. After all, Teamwork is Dreamwork.
I also told Chase and Annie that in his line of work, construction, Chase should wear his silicone ring. Working with your hands all day is just an invitation to lose the ring. It is also very possible to severely damage the ring, while building homes. Chase already is wearing his silicone ring and actually had it on, when I arrived. Better safe than sorry. I personally remove my wedding ring, whenever I go metal detecting, doing yard work or go to the beach. Again, better safe than sorry. It’s so much easier to replace an inexpensive ring, than a very sentimental ring.
So, another ring back on the finger and another smile on the face. I’ll say it again, “I have the best job in the world and there is no better feeling than to help someone get their very sentimental ring back.”
I would like to congratulate Annie and Chase, on their recent marriage Here is wishing Annie and Chase a lifetime of love and happiness 😀❤️🙏